Biggest visual gain on the elevation
Because the door occupies so much of the frontage, recolouring it changes the impression of the whole property more than almost any other single job.
A smarter alternative to replacing your kitchen or UPVC.
Garage Door Spraying
A garage door is often the largest single surface on the front of a house, so a faded, chalky or mismatched door drags down everything around it. Where the door mechanism is sound, spraying is the quickest way to bring it back into line with the windows and entrance.
Up-and-over, sectional, roller and UPVC doors — sprayed in place and covered by our 2-year workmanship guarantee.

Because the door occupies so much of the frontage, recolouring it changes the impression of the whole property more than almost any other single job.
New garage doors mean new tracks, springs or motors. If yours opens and closes properly, there is no need to replace the hardware to change the colour.
Garage doors are frequently the odd one out. Spraying them in the same colour as the windows, entrance door and roofline pulls the frontage together.
South-facing doors lose their colour first. Preparation removes the degraded surface layer before the new coating goes on.
Real SmartSprayers projects. Drag the handle, or use the arrow keys, to compare.


Every project is assessed honestly first. If the frames, panels or boards would be better replaced than sprayed, we will tell you before you spend anything.
We identify the door type and substrate — steel, aluminium, UPVC, GRP or timber — because preparation differs for each.
Road film, algae and chalked residue are washed off and the surface is degreased.
Any surface corrosion is addressed on metal doors, and the whole panel is keyed ready for primer.
Driveway, brickwork, tracks, seals, handles and any adjacent glazing are protected before coating.
A suitable primer for the substrate, then controlled topcoats applied in even passes across the full panel.
Once the coating is sound, we remove masking and check the door runs and seals as it did before.
Garage doors look best either matched to the windows or deliberately contrasted with the brickwork. Common choices:
We recommend approving a physical sample against your own property, in daylight, before we begin.

Yes, whenever the door is structurally sound and operating properly. Spraying addresses appearance; it will not fix a mechanical fault.
Yes. Steel and aluminium doors are very common for us. Any surface corrosion is treated as part of preparation.
Anthracite grey and black are the most requested because they sit well against brick and match modern windows. Matching the door to your window colour is usually the safest long-term choice.
Yes, in the great majority of cases. The surrounding driveway, brickwork and frame are masked and protected first.
Most single and double doors are completed quickly, but drying and curing time between coats still applies. We confirm timings with your quotation.
We will tell you on site how long to leave it. Opening a door before the coating has hardened is the fastest way to damage a good finish.
Garage doors take direct exposure, which is why preparation and correct primer selection matter. Our workmanship is covered for two years.
Yes, and it usually makes sense to do so. One visit, one colour and a consistent frontage.
Garage Door Spraying is available to homeowners across both counties. Send your postcode with a few photographs and we will confirm coverage.
Answer a few quick questions and we will come back to you. Prefer to show us? Send photographs straight to WhatsApp and we will review them.
Five quick questions — one at a time. No obligation, and we will confirm coverage for your postcode.